Short Description:
Physical/chemical hazards: non-flammable and explosive products.
Health hazards: It has a certain irritating effect on the eyes and skin ; accidental ingestion has a irritating effect on the mouth and stomach.
Carcinogenicity: None.
Keywords:
Water Base Lubricant FC-LUBE WB
Category:
Details Description
| Model | Main ingredients | Content | CAS NO. |
| FC-LUBE WB | Polyalcohols | 60-80% | 56-81-5 |
| Ethylene glycol | 10-35% | 25322-68-3 | |
| Patent additive | 5-10% | N/A |
Skin contact: Take off contaminated clothing and rinse with soapy water and running water.
Eye contact: Lift the eyelid and immediately rinse with plenty of flowing water or normal saline. Seek medical attention if you have symptoms of itching.
Ingestion accidentally: Drink enough warm water to induce vomiting. See a doctor if you feel unwell.
Careless inhalation: leave the scene to a place with fresh air. If breathing is difficult, seek medical attention.
Flammability characteristics: refer to Part 9 "Physical and Chemical Properties".
Extinguishing agent: foam, dry powder, carbon dioxide, water mist.
Leakage: Try to collect the leakage and clean the leakage.
Disposal of waste: bury it in an appropriate place, or dispose of it in accordance with local environmental protection requirements.
Packing treatment: hand over to the garbage station for proper treatment.
Handling: Keep the container tightly closed to avoid contact with skin and eyes. Wear appropriate personal protective equipment.
Storage precautions: It should be stored in a cool and dry place, protected from sun and rain, away from heat, fire and non-coexistent materials.
Engineering control: In most cases, good comprehensive ventilation can achieve the purpose of protection.
Respiratory protection: wear a dust mask.
Skin protection: Wear impermeable overalls and protective gloves. Eye/lid protection: wear chemical safety glasses.
Other protection: Smoking, eating and drinking are prohibited at the work site.
| Code | FC-LUBE WB |
| Color | Dark brown |
| Traits | Liquid |
| Density | 1.24±0.02 |
| Water soluble | Soluble |
Conditions to avoid: open flames, high heat.
Incompatible materials: oxidizing agents.
Hazardous decomposition products: None.
Invasion route: inhalation and ingestion.
Health hazards: Ingestion can cause irritation to the mouth and stomach.
Skin contact: Prolonged contact can cause slight redness and itching of the skin.
Eye contact: Causes eye irritation and pain.
Ingestion accidentally: cause nausea and vomiting.
Careless inhalation: cause coughing and itching.
Carcinogenicity: None.
Degradability: The substance is easily biodegradable.
Ecotoxicity: This product is non-toxic to organisms.
Disposal method: bury it in an appropriate place, or dispose of it in accordance with local environmental protection requirements.
Contaminated packaging: handled by a unit designated by the environmental management department.
This product is not listed in the International Regulations on the Transport of Dangerous Goods (IMDG, IATA, ADR/RID).
Packing: The liquid is packed in barrel.
Regulations on the Safety Management of Hazardous Chemicals
Detailed Rules for the Implementation of the Regulations on the Safety Management of Hazardous Chemicals
Classification and marking of commonly used hazardous chemicals (GB13690-2009)
General Rules for the Storage of Commonly Used Hazardous Chemicals (GB15603-1995)
General technical requirements for transport and packaging of dangerous goods (GB12463-1990)
Issue Date: 2020/11/01.
Revision date: 2020/11/01.
Suggested use and usage restrictions: Please refer to other product and (or) product application information. This product can only be used in industry.
FC-LUBE WB is an environmentally friendly water-based lubricant based on polymeric alcohol, which has good shale inhibition, lubricity, high temperature stability and anti-pollution properties. It is non-toxic, easily biodegradable and has little damage to the oil formation, and is widely used in oilfield drilling operations with good effect
• Improving the rheology of drilling fluids and increasing the solid phase capacity limit by 10 to 20%.
• Improvement of organic treating agent heat stabilizer, improving the temperature resistance of the treating agent by 20~30℃.
• Strong anti-collapse ability, regular well diameter, average borehole enlargement rate ≤ 5%.
• Borehole mud cake with properties similar to oil-based drilling fluid mud cake, with excellent lubricity.
• Improving filtrate viscosity, molecular colloid blocking and reducing oil-water interfacial tension to protect the reservoir.
• Preventing mud pack of drill bit, reducing complex accidents downhole and improving mechanical drilling speed.
• LC50>30000mg/L, protect the environment.
Item | Index |
Appearance | Dark brown liquid |
Density (20℃), g/cm3 | 1.24±0.02 |
Dumping point, ℃ | <-25 |
Fluorescence, grade | <3 |
Lubrication coefficient reduction rate, % | ≥70 |
• Alkaline, acidic systems.
• Application temperature ≤140°C.
• Recommended dosage: 0.35-1.05ppb (1-3kg/m3).
• 1000L/ drum or based on customers’ request.
• Shelf life:24 months.
Previous Page
Next Page
Previous Page
Next Page
Related Products
FC-605S Fluid Loss Control Additives
Short Description:
Scope of application Temperature: below 180 ℃ (BHCT). Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-605S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-605S can provide liquid product FC-605L.
FC-600S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 180 ℃ (BHCT). Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-600S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-600S can provide liquid product FC-600L.
FC-610S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 230 ℃ (BHCT).Temperature: below 230 ℃ (BHCT).
Packaging FC-610S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-610S can provide liquid product FC-610L.
FC-620S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 150 ℃ (BHCT).Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-620S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-620S can provide liquid product FC-620L.
Online Consultation
We will contact you within one business day. Please pay attention to your email.
Contact Us
Customer Service Hotline:+86 15552295233
E-mail:ever@jiuyuchem.com
Company Address:No. 1002, Building 52, Taishan Road, Yantai Development Zone
Quick Links
