Short Description:
Physical/chemical hazard: non flammable and explosive products.
Health hazard: It has certain irritating effect on eyes and skin; Eating by mistake may cause irritation to the mouth and stomach.
Carcinogenicity: None.
Keywords:
Erucic Amidopropyl Dimethyl Betaine Surfactant
Category:
Details Description
Physical/chemical hazard: non flammable and explosive products.
Health hazard: It has certain irritating effect on eyes and skin; Eating by mistake may cause irritation to the mouth and stomach.
Carcinogenicity: None.
Type | Main component | Content | CAS NO. |
Erucic Amidopropyl Dimethyl Betaine Surfactant | Amidopropyl betaine | 95-100% | 581089-19-2 |
Skin contact: Take off the contaminated clothes and wash with soapy water and flowing clean water.
Eye contact: Lift the eyelids and immediately wash them with a large amount of flowing water or normal saline. Seek medical attention in case of pain and itching.
Ingestion: Drink enough warm water to induce vomiting. Get medical attention if you feel unwell.
Inhalation: Leave the site to a place with fresh air. If breathing is difficult, seek medical advice.
Combustion and explosion characteristics: Refer to section 9 "Physical and Chemical Properties".
Extinguishing agent: Foam, dry powder, carbon dioxide, water mist.
Personal protective measures: Wear appropriate personal protective equipment. See Section 8 "Protective Measures".
Release: Try to collect the release and clean the leakage place.
Waste disposal: Bury properly or dispose according to local environmental protection requirements.
Packaging treatment: Transfer to the garbage station for proper treatment.
Handling: Keep the container sealed and avoid skin and eye contact. Wear appropriate personal protective equipment.
Precautions for storage: It should be stored in a cool and dry place to prevent exposure to the sun and rain, and away from heat, fire and materials to be avoided.
Engineering control: In most cases, good overall ventilation can achieve the purpose of protection.
Respiratory protection: Wear a dust mask.
Skin protection: Wear impermeable work clothes and protective gloves.
Eye/eyelid protection: Wear chemical safety goggles.
Other protection: Smoking, eating and drinking are prohibited at the work site.
Item | Erucic Amidopropyl Dimethyl Betaine Surfactant |
Color | Colorless to light yellow |
Characters | liquid |
Odor | - |
Water solubility | water-soluble |
Conditions to avoid: open fire, high heat.
Incompatible substance: oxidants.
Hazardous decomposition products: None.
Invasion route: inhalation and ingestion.
Health hazard: ingestion may cause irritation to the mouth and stomach.
Skin contact: Long time contact may cause slight redness and itching of the skin.
Eye contact: cause eye irritation and pain.
Ingestion: cause nausea and vomiting.
Inhalation: cause cough and itching.
Carcinogenicity: None.
Degradability: The substance is not easily biodegradable.
Ecotoxicity: This product is slightly toxic to organisms.
Waste disposal method: bury properly or dispose according to local environmental protection requirements.
Contaminated packaging: it shall be handled by the unit designated by the environmental management department.
This product is not listed in the International Regulations on the Transport of Dangerous Goods (IMDG, IATA, ADR/RID).
Packaging: The powder is packed in bags.
Regulations on Safety Management of Hazardous Chemicals
Detailed Rules for the Implementation of the Regulations on the Safety Management of Hazardous Chemicals
Classification and Marking of Common Hazardous Chemicals (GB13690-2009)
General Rules for Storage of Common Hazardous Chemicals (GB15603-1995)
General technical requirements for transport packaging of Hazardous goods (GB12463-1990)
Issue date: 2020/11/01.
Revision date: 2020/11/01.
Recommended and restricted use: Please refer to other products and/or product application information. This product can only be used in industry.
Previous Page
Previous Page
Related Products
FC-605S Fluid Loss Control Additives
Short Description:
Scope of application Temperature: below 180 ℃ (BHCT). Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-605S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-605S can provide liquid product FC-605L.
FC-600S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 180 ℃ (BHCT). Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-600S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-600S can provide liquid product FC-600L.
FC-610S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 230 ℃ (BHCT).Temperature: below 230 ℃ (BHCT).
Packaging FC-610S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-610S can provide liquid product FC-610L.
FC-620S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 150 ℃ (BHCT).Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-620S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-620S can provide liquid product FC-620L.
Online Consultation
We will contact you within one business day. Please pay attention to your email.
Contact Us
Customer Service Hotline:+86 15552295233
E-mail:ever@jiuyuchem.com
Company Address:No. 1002, Building 52, Taishan Road, Yantai Development Zone
Quick Links
