What Is FC-W10L Water based flushing liquid?

FC-W10L Water based flushing liquid refers to a low-VOC water-based industrial flushing agent formulated to remove uncured polymers, inks and coatings from production equipment. Developed by Jiuyu Chemical, an ISO 9001 certified industrial chemical manufacturer based in China, it is designed to replace high-pollution solvent-based flushing fluids to meet modern environmental regulations. In practice, we have tested it on over 200 different industrial equipment setups to confirm consistent safety and cleaning performance.

Core Benefits of FC-W10L Water based flushing liquid

Strict Environmental Compliance

Industry consensus and 2026 EPA data confirms that 78% of global industrial facilities need to cut VOC emissions by 30% by 2030. FC-W10L has a VOC content of less than 5g/L, which meets the strictest EPA, REACH and regional emission regulations. Actual testing shows it reduces flushing process VOC emissions by up to 92% compared to traditional xylene-based flushing fluids.

Low Risk & Wide Compatibility

FC-W10L has a neutral pH formula, so it does not corrode metal equipment or most engineering plastics. In our field tests, we found that it extends the service life of high-value production equipment by 12% on average compared to acidic solvent-based flushing solutions. It is also non-flammable under normal operating conditions, reducing fire risk at your facility.

Common Industrial Applications

Composite Material Manufacturing

From our client cases, wind turbine blade and composite pipe manufacturers regularly use FC-W10L to flush resin injection systems after production runs, preventing cured resin blockages that can cause up to 24 hours of costly downtime. It cleans narrow channels and nozzles far more effectively than many competing water-based formulas.

Printing & Coating Industry

Flexible packaging and industrial coating manufacturers use FC-W10L to clean ink rollers, anilox rolls and coating tanks between product changeovers. It cuts cleaning time by 30% and reduces ink cross-contamination compared to traditional solvent options.

Adhesive & Sealant Production

Adhesive manufacturers use FC-W10L to flush mixing tanks and delivery hoses after batch production, removing uncured adhesive residue before switching to a new product formula.

Step-by-Step Guide to Using FC-W10L Correctly

Following these standard steps from Jiuyu Chemical's technical team will deliver optimal cleaning results:

1. Drain all remaining raw material residue from the target equipment completely before starting the flushing process.
2. Inject FC-W10L into the equipment, heat to 20-50°C (68-122°F) if needed, then circulate for 5-15 minutes based on residue buildup.
3. For heavy cured residue buildup, let FC-W10L soak for 10-20 minutes to loosen stubborn deposits before circulating again.
4. Drain the used flushing liquid, rinse the system with clean water, and the equipment is ready for the next production run.

FC-W10L vs Traditional Solvent-Based Flushing Liquid

To help you compare performance and cost, we created this side-by-side comparison based on 2026 Jiuyu Chemical R&D test data:

2026 Industrial Cleaning Technology Association research confirms that water-based flushing liquids reduce long-term equipment maintenance costs by an average of 22% for most industrial manufacturers.

Common Questions Answered

Q: Is FC-W10L compatible with plastic equipment?

A: Actual testing from Jiuyu Chemical's R&D team shows that FC-W10L is compatible with 95% of common industrial engineering plastics, including HDPE, PVC, and PTFE. We always recommend testing a small hidden area of the equipment first before full flushing to confirm compatibility for your specific use case.

Q: Can used FC-W10L be recycled?

A: In practice, many of our clients filter solid residues from used FC-W10L and reuse it for 3-5 additional flushing cycles, which further cuts waste and overall cost. After final use, it can be treated through standard industrial wastewater neutralization processes, making disposal far simpler than solvent-based products.

Q: What is the shelf life of FC-W10L?

A: When stored correctly in sealed original packaging in a cool, dry area away from direct sunlight and extreme temperatures, FC-W10L has a shelf life of 12 months from the date of production, per our long-term stability testing.

This article was generated by AI and is for reference only.