Short Description:
Scope of application Temperature: below 230℃ (BHCT).Dosage: 0.2%-0.5% (BWOC).
Packaging FC-D15L is packaged in 25L or 200L plastic drums, or packaged according to customer requirements.
Keywords:
FC-D15L Oil ester defoamer
Category:
Details Description
High efficient foam preventer which can quickly eliminate the foam generated in the cement slurry. Good inhibitive and degassing effect. Disperses well in the cement slurry, and inhibits foam from being produced by other additives.
• FC-D15L is a type of oil ester defoamer, and can quickly eliminate foams generated in the process of slurry mixing, and has good foam inhibition performance in cement slurry.
• FC-D15L has good compatibility with additives of cement slurry system, and will not affect the performance of conventional cement slurry and the development of compressive strength of set cement.
| Product | Group | Component | Range |
| FC-D15L | Defoamer | Ether | <230degC |
Item | Index |
Appearance | Colorless or yellowish transparent liquid |
Density (20℃), g/cm3 | 0.85±0.05 |
Odor | Mild irritation |
Defoaming rate, % | ＞90 |
In oilfield, defoamers are most often used to control oil foam in separators to minimize oil-carry-over into the gas stream or gas-carry-under into the oil system. The defoamer chemistry is mostly silicone based or fluorosilicone based (which is more effective but much more expensive as well). Our FC-D15L Defoamer can effectively limit the liquid carry over in your separators and other processing units brought on by foaming.
Q1 What is your main product?
We mainly produce oil well cementing and drilling additives, like fluid loss control, retarder, dispersant, anti-gas migration, deformer, spacer, flushing liquid and etc.
Q2 Can you supply samples?
Yes, we can supply free samples.
Q3 Can you customize product?
Yes, we can supply you products according to your requirements.
Q4 Which countries are your key customers from?
North America, Asia, Europe and other regions.
Previous Page
Next Page
Previous Page
Next Page
Related Products
FC-605S Fluid Loss Control Additives
Short Description:
Scope of application Temperature: below 180 ℃ (BHCT). Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-605S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-605S can provide liquid product FC-605L.
FC-600S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 180 ℃ (BHCT). Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-600S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-600S can provide liquid product FC-600L.
FC-610S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 230 ℃ (BHCT).Temperature: below 230 ℃ (BHCT).
Packaging FC-610S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-610S can provide liquid product FC-610L.
FC-620S Fluid loss Control additives
Short Description:
Scope of application Temperature: below 150 ℃ (BHCT).Dosage: 0.6% – 3.0% (BWOC) is recommended.
Packaging FC-620S is packed in 25kg three in one composite bag, or packaged according to customer requirements.
Remarks FC-620S can provide liquid product FC-620L.
Online Consultation
We will contact you within one business day. Please pay attention to your email.
Contact Us
Customer Service Hotline:+86 15552295233
E-mail:ever@jiuyuchem.com
Company Address:No. 1002, Building 52, Taishan Road, Yantai Development Zone
Quick Links
